Pure Nickel
- Description:
Our pure nickel material is produced by utilizing the nickel plate with the purity of 99.99% as the raw material. After a series of processes containing vacuum smelting, rolling, forging, calendering, annealing, surface treatment and testing in each process, it comes out with the purity of 99.6% and 99.9%.
Round bare wire: Diameter: 0.02-12mm
Enameled wire: 0.05-1.5mm
Stranded wire: (0.03-0.5mm)x (3-1000strands)
JNL® Pure Nickel Ribbon/Strip/tape/foil:
(0.02-3.0mm)x(0.5-250mm)
- Contact Now
Detail
Physical Characteristics (Reference Values)
Brand Name | JNL® | Form of Delivery | ||||||||||
Material | Pure nickel | JNL is supplied in the form of wires with dimensions from 0.02 to 8mm diameter in bare condition. Enamelled wires are avoilable in dimensions 0.05-1.5mm. JNL can also supply in form of stranded wire, ribbion, flat wire and rods. | ||||||||||
Code | Ni 99.9 | |||||||||||
Chemical composition (max)% | ||||||||||||
Ni 99.9 | C 0.01 | Cu 0.01 | Mn 0.003 | Si 0.074 | Other 0.02 |
Density | Melting Point | Resistivity | coefficient of expansion | tensile strenght | Elongation | |||||||
20℃ | 100℃ | 400℃ | % | |||||||||
g/cm3 | lb/cub in | ℃ | Ωmm2/m | 10-6/K | 10-6/K | Mpa | Ø0.02-0.063 | Ø0.063-0.125 | Ø0.125-0.5 | Ø0.5-1.0 | Ø1.0-8.0 | |
8.9 | 0.32 | 1450 | 0,075 | 13,00 | 14,00 | >400 | ≈10 | ≈15 | ≈18 | ≈25 | >30 |
Diameter | Weight | Resistance | Diameter | Weight | Resistance | |||||
mm | Tolerance | g/km |
Ω/m 20℃ |
mm | Tolerance | kg/km |
Ω/m 20℃ |
|||
0.03 | ±0.0015 | 6.29 | 693.56 | 0.45 | ±0.015 | 1.4 | 3.08 | |||
0.04 | ±0.002 | 11.18 | 390.13 | 0.50 | ±0.015 | 1.7 | 2.50 | |||
0.05 | ±0.002 | 17.47 | 249.68 | 0.55 | ±0.03 | 2.1 | 2.06 | |||
0.06 | ±0.0025 | 25.15 | 173.39 | 0.60 | ±0.03 | 2.5 | 1.73 | |||
0.07 | ±0.0025 | 34.23 | 127.39 | 0.65 | ±0.03 | 3.0 | 1.48 | |||
0.08 | ±0.003 | 44.71 | 97.53 | 0.70 | ±0.03 | 3.4 | 1.27 | |||
0.09 | ±0.003 | 56.59 | 77.06 | 0.75 | ±0.03 | 3.9 | 1.11 | |||
0.10 | ±0.003 | 69.87 | 62.42 | 0.80 | ±0.03 | 4.5 | 0.98 | |||
0.11 | ±0.004 | 84.54 | 51.59 | 0.85 | ±0.03 | 5.0 | 0.86 | |||
0.12 | ±0.004 | 101 | 43.35 | 0.90 | ±0.03 | 5.7 | 0.77 | |||
0.13 | ±0.004 | 118 | 36.94 | 1.00 | ±0.03 | 7.0 | 0.62 | |||
0.14 | ±0.004 | 137 | 31.85 | 1.10 | ±0.04 | 8.5 | 0.52 | |||
0.15 | ±0.005 | 157 | 27.74 | 1.20 | ±0.04 | 10.1 | 0.43 | |||
0.16 | ±0.005 | 179 | 24.38 | 1.30 | ±0.04 | 11.8 | 0.37 | |||
0.17 | ±0.005 | 202 | 21.60 | 1.40 | ±0.05 | 13.7 | 0.32 | |||
0.18 | ±0.005 | 226 | 19.27 | 1.50 | ±0.05 | 15.7 | 0.28 | |||
0.19 | ±0.005 | 252 | 17.29 | 1.60 | ±0.05 | 17.9 | 0.24 | |||
0.20 | ±0.006 | 279 | 15.61 | 1.70 | ±0.05 | 20.2 | 0.22 | |||
0.22 | ±0.006 | 338 | 12.90 | 1.80 | ±0.06 | 22.6 | 0.19 | |||
0.25 | ±0.006 | 437 | 9.99 | 1.90 | ±0.06 | 25.2 | 0.17 | |||
0.28 | ±0.007 | 548 | 7.96 | 2.00 | ±0.06 | 27.9 | 0.16 | |||
0.30 | ±0.007 | 629 | 6.94 | 2.10 | ±0.06 | 30.8 | 0.14 | |||
0.32 | ±0.01 | 715 | 6.10 | 2.20 | ±0.06 | 33.8 | 0.13 | |||
0.35 | ±0.01 | 856 | 5.10 | 2.30 | ±0.06 | 37.0 | 0.12 | |||
0.38 | ±0.01 | 1009 | 4.32 | 2.40 | ±0.06 | 40.2 | 0.11 | |||
0.40 | ±0.01 | 1118 | 3.90 | 2.50 | ±0.06 | 43.7 | 0.10 |
Thickness(mm) | width (mm) | Treatment | Hardness (HV) | Tensile strength (Mpa) | Elongation % | Bends times |
0,01~4,00 | 2,0-220 | H | ≥190 | ≥540 | ≥2 | ≥5 |
1/2H | 150-190 | ≥494 | ≥9 | ≥5 | ||
1/4H | 110-150 | ≥442 | ≥14 | ≥5 | ||
M | 75-110 | ≥392 | ≥20 | ≥5 |
Chemical composition% | |||||||||
Grade | Ni+Co | Cu | Fe | Mn | C | Si | S | ||
Ni201 | ≥99.9 | ≤0.015 | ≤0.04 | ≤0.02 | ≤0.01 | ≤0.03 | ≤0.001 | ||
Ni200 | ≥99.6 | ≤0.06 | ≤0.10 | ≤0.05 | ≤0.10 | ≤0.10 | ≤0.005 |
Thickness (mm) | Tolerance (mm) | Width tolerance (mm) | weight/coil (kg) | |
0.01~0.03 | ±0.003 | 2~15 (±0.05) | 15~220 (±0.1) | according to customers request |
>0.03~0.05 | ±0.003 | |||
>0.05~0.09 | ±0.005 | |||
>0.09~0.15 | ±0.007 | |||
>0.15~0.3 | ±0.010 | |||
>0.3~0.45 | ±0.015 | |||
>0.45~0.55 | ±0.020 | |||
>0.55~0.85 | ±0.025 | |||
>0.85~0.95 | ±0.030 | |||
>0.95~1.2 | ±0.035 | |||
>1.2~1.4 | ±0.040 | |||
>1.4~1.7 | ±0.050 | |||
>1.7~2.0 | ±0.060 | |||
>2.0~4.0 | ±0.080 |